This browser does not support the video element.
| P/N | Diameter | Length | P/N | Diameter | Length | P/N | Diameter | Length |
| 80201 | φ9 | 200 | 180 | φ10 | 280 | 80231 | φ11 | 360 |
| 80202 | 220 | 80217 | 300 | 80232 | 380 | |||
| 80203 | 240 | 80218 | 320 | 80233 | 400 | |||
| 80204 | 260 | 80219 | 340 | 80234 | φ12 | 200 | ||
| 80205 | 280 | 80220 | 360 | 80235 | 220 | |||
| 80206 | 300 | 80221 | 380 | 80236 | 240 | |||
| 80207 | 320 | 80222 | 400 | 80237 | 260 | |||
| 80208 | 340 | 80223 | φ11 | 200 | 80238 | 280 | ||
| 80209 | 360 | 80224 | 220 | 80239 | 300 | |||
| 80210 | 380 | 80225 | 240 | 80240 | 320 | |||
| 80211 | 400 | 80226 | 260 | 80241 | 340 | |||
| 80212 | φ10 | 200 | 80227 | 280 | 80242 | 360 | ||
| 80213 | 220 | 80228 | 300 | 80243 | 380 | |||
| 80214 | 240 | 80229 | 320 | 80244 | 400 | |||
| 80215 | 260 | 80230 | 340 | |||||
| Material:Titanium Alloy、Stainless Steel | ||||||||
| Note:Used for fractures of the lower 1/3 of femur | ||||||||
Lag Screw
| P/N | Material | Diameter(mm) | Length(mm) |
| 80301 | Titanium Alloy/Stainless Steel | φ5 | 45-95mm |
φ4.7 Full Thread Locking Screw
| P/N | Material | Diameter(mm) | Length(mm) |
| 49101 | Titanium Alloy/Stainless Steel | φ4.7 | 30-85mm |
φ4.7 Locking Screw with Inner Thread
| P/N | Material | Diameter(mm) | Length(mm) |
| 4915 | Titanium Alloy/Stainless Steel | φ4.7 | 30-85mm |
Instrument Kit for Femur Supracondylar Reverse Interlocking Nail
| Femur Supracondylar Reverse Interlocking Nail Instruments set | ||||
| NO | Code no | Product name | Size | QTY |
| 1 | 80901 | Developing Calculator | φ9.5-φ12×200-400 | 1 |
| 2 | 80902 | Guide pin | φ3.2×300 | 2 |
| 3 | 80903 | Guide pin | φ3.2×400 | 2 |
| 4 | 80904 | Porous guide pin sleeve | φ3.2/φ14 | 1 |
| 5 | 80905 | Guide Sleeve | φ14 | 1 |
| 6 | 80906 | Proximal Hollow Drill Bit | φ3.2/φ14 | 1 |
| 7 | 80907 | Quick Coupling Handle | φ8 | 1 |
| 8 | 80908 | Adapter | φ8 | 1 |
| 9 | 80909 | Cannulated AWL | φ13.5/φ4 | 1 |
| 10 | 80910 | Reduction Bod(Guide Pin) | 1 | |
| 11 | 80911 | Guide Pin Holder | 1 | |
| 12 | 80912 | Ball Head Guide Pin | φ2.5/1000 | 1 |
| 13 | 80913 | Reamer Shaft | 2 | |
| 14 | 80914 | Shelf for reamer bit | 1 | |
| 15 | 80915 | Flexible Reamer Bit | φ8.5/φ13.5 | 11 |
| 16 | 80916 | Handle | 1 | |
| 17 | 80917 | Connection Screw | M8×1/SW6.5 | 2 |
| 18 | 80918 | Extension Connection Bolt | M8×1/SW11 | 1 |
| 19 | 80919 | Connection Rod Driver | SW6.5 | 1 |
| 20 | 80920 | Main nail pull connection rod | M8×1 | 1 |
| 21 | 80921 | Wrench | SW11 | 1 |
| 22 | 80922 | Pulling Rod | M8×1 | 1 |
| 23 | 80923 | Sliding Hammer | 1 | |
| 24 | 80924 | Proximal Guide Bar | 1 | |
| 25 | 80925 | Handle Connection Locking Wheels | M8×1/SW5 | 1 |
| 26 | 80926 | Guide Pin Locking Wheels | M8×1/SW5 | 2 |
| 27 | 80927 | Locking Wheels Spanner | SW5 | 1 |
| 28 | 80928 | Sleeve | φ11/φ8.6 | 2 |
| 29 | 80929 | Lag screw Drill Slleve | φ5.0 | 2 |
| 30 | 80930 | Locking Screw Drill Sleeve | φ4.3 | 2 |
| 31 | 80931 | Lag screw Sleeve Pin | φ5.0 | 1 |
| 32 | 80932 | Locking Screw Sleeve Pin | φ4.3 | 1 |
| 33 | 80933 | Step drill (a stopper) | φ3.5/φ5.0 | 2 |
| 34 | 80934 | Bone drill (a stopper) | φ4.3*300 | 2 |
| 35 | 80935 | Depth Gauge | 1 | |
| 36 | 80936 | Tap for Lag Screw | φ5.0 | 1 |
| 37 | 80937 | Tap for Lag Screw | φ6.5 | 1 |
| 38 | 80938 | Wrench for Lag Screw | M2.5/SW5.0 | 1 |
| 39 | 80939 | Distal guide rod | 280-400 | 1 |
| 40 | 80940 | Distal positioning frame | 1 | |
| 41 | 80941 | Short nail distal guide rod | 200-260 | 1 |
| 42 | 80942 | Positioning pipe | φ8.1/φ10 | 1 |
| 43 | 80943 | Positioning stem drill sheath | φ5.2 | 1 |
| 44 | 80944 | Positioning stem bushing needle | 1 | |
| 45 | 80945 | Positioning bone drill | φ5.2 | 1 |
| 46 | 80946 | Positioning stem flats drill | φ5.2 | 1 |
| 47 | 80947 | Positioning rod | 1 | |
| 48 | 80948 | Positioning card | 1 | |
| 49 | 80949 | Wrench for locking screw | SW4.0 | 1 |
| 50 | 80950 | End cap holder | SW4.0 | 1 |
| 51 | 80951 | Left and right positioning block | 1 | |
| 52 | 80952 | Left and right positioning block lock wheel | 1 | |
| 53 | 80953 | Instrument kit | 1 | |
Features:
●Three lag screws at the distal end are cross-fixed to enhance the anti-rotation stability and avoid the swing of the main nail in the medullary cavity.The design of the tension compression locking nail can effectively solve the compression fixation of the distal femoral split.