Introduction of external fixator

The external fixator has now become the first choice for the corresponding surgical treatment of orthopedics. This article will mainly introduce the external fixator.

• Introduction of external fixator.

• All external fixator products of Jiangsu Jinlu Group Medical Device Co., Ltd.

Introduction of external fixator.

The external fixator has now become the preferred method of orthopedic surgery. The external fixator technique is to connect adjacent bone segments or limbs through percutaneous needles and external connectors, and stabilize the fracture after basic anatomical reduction. Fixation provides the required biomechanical environment for fracture healing and can meet the needs of patients for functional rehabilitation exercise. It is a good orthopedic surgical treatment technique. The external fixator is neither internal fixation nor external fixator, but it has an effect that cannot be achieved by internal fixation and external fixator in the past. Care before and after the operation is very important. Careful and meticulous care can reduce the occurrence of complications for the patient, restore the function of the injured limb as soon as possible, and promote the patient's speedy recovery.

Whether the external fixator is loose or not, check the firmness of the bracket regularly after the operation, and the tightness of the screws and fixation pins. Keep it stable and reliable, and ensure practical functional exercises, so as to avoid the movement of the fracture site due to the loosening of the external fixator when the patient is performing functional exercises, which affects the healing of the fracture.

Prevention of needle tract infection Since the screw needle of the external fixator directly communicates with the body, it is prone to secondary infection, so attention should be paid to needle hole care. Keeping the needle track dry is an effective measure to prevent needle-eye infection. Therefore, the surrounding skin should be kept clean and dry. The sterile dressing at the needle-eye should be changed regularly. The needle should be instilled with 75% alcohol twice a day and covered with sterile gauze. Do not use iodophor. The preparation is clean.

All external fixator products of Jiangsu Jinlu Group Medical Device Co., Ltd.

Jiangsu Jinlu Group Medical Device Co., Ltd. is located in Zhangjiagang, an international trade port on the lower reaches of the Yangtze River. Founded in 1958, the company is engaged in the development, manufacturing and sales of orthopedic equipment. It has become one of the key external fixator equipment manufacturers for medical equipment in the country and a governing unit of China Medical Equipment Industry Association. The implant manufacturer has 62 years of experience in the manufacture of orthopedic implants and devices.

The manufacturer of orthopedic implants uses orthopedic devices as its main products, with "Golden Deer" brand medical devices mainly in general surgery, thoracic, and gynecology. The orthopedic instruments manufactured by this orthopedic implant manufacturer include fracture fixation plates, fracture screws, anatomical fracture plates, locking intramedullary nails, spine retainers, hip prostheses, external fixators and other related orthopedic surgical instruments.

Our company is a better external fixator manufacturer. If you have any needs in this regard, you can get in touch with our company. The orthopedic implant manufacturer will provide you with the best external fixator products and services.

In addition, we also provide Maxillofacial Plates, Spinal Products, etc.