| NO. | REF | Description | Qty |
| 1 | GG002-05 | Universal Handle（M8*1-M10*1） | 1 |
| 2 | GG002-02 | ø12 Hard Reamer（triangle） | 1 |
| 3 | GG002-03 | ø13 Hard Reamer（triangle） | 1 |
| 4 | GG002-01 | T type Positioning Rod | 1 |
| 5 | GG002-08 | Distal Guide Rod | 1 |
| 6 | GG002-10 | Distal Target Device | 1 |
| 7 | GG002-11 | Main Nail Handle | 1 |
| 8 | GG002-04 | Positioning card | 1 |
| 9 | GG002-07 | Hollow M8*1 Hanging Rod Bolt | 1 |
| 10 | GG002-06 | Connecting Bolt M10*1 | 1 |
| 11 | GG002-09 | Proximal Guide Rod | 1 |
| 12 | JG001-23 | Pull Device M10*1 L350 | 1 |
| 13 | JG001-18 | Guide Pin Φ2.5x660 | 1 |
| 14 | JG001-28 | ø10 Hard Reamer（triangle） | 1 |
| 15 | JG001-29 | ø11 Hard Reamer（triangle） | 1 |
| 16 | JG001-01 | Φ4.0*300 Drill Bit | 2 |
| 17 | JG001-02 | ø4.0 Drill Bit Postion Stopper | 1 |
| 18 | JG001-03 | Drill Bit ø5.2*300（triangle） | 1 |
| 19 | JG001-11 | Cannula（ø5.2*ø8*150） | 2 |
| 20 | JG001-12 | Cannula（ø4.0*ø8*150） | 1 |
| 21 | JG001-22 | Proximal Positioning Rod Locking Weel M8*1-SW5 | 1 |
| 22 | JG001-21 | Proximal Target Device Locking Weel M8*1-SW5 | 3 |
| 23 | JG001-09 | Positioning Rod ø8*140 | 1 |
| 24 | JG001-08 | Right Angle Positioning Rod | 1 |
| 25 | JG001-07 | Depth Gauge 10-100mm | 1 |
| 26 | JG001-04 | ø5.2 T type Positioning Rod Flat Head Drill | 1 |
| 27 | JG001-05 | T type Wrench（Hex）SW3.5 | 1 |
| 28 | JG001-10 | Sleeve ø8*ø10*125mm | 3 |
| 29 | JG001-30 | AWL | 1 |
| 30 | JG001-24 | T type Reamer Quick Couping Handle（triangle） | 1 |
| 31 | JG001-14 | L type Wrench（Hex）SW5 | 1 |
| 32 | JG001-13 | L type Wrench（Hex）SW3 | 1 |
| 33 | JG001-15 | Open Wrench SW11 | 1 |
| 34 | Instrument Box | 1 |