NO. | REF | Description | Qty |
1 | GG003-22 | Open Device | 1 |
2 | GG003-10 | Pull Device M8*1 L300 | 1 |
3 | GG003-05 | Φ2.9*250mm Drill Bit | 2 |
4 | GG003-02 | ø7.5 Hard Reamer(triangle) | 1 |
5 | GG003-03 | ø8.0 Hard Reamer(triangle) | 1 |
6 | GG003-04 | ø8.5 Hard Reamer(triangle) | 1 |
7 | GG003-13 | HA3.5T type Screw Tap | 1 |
8 | GG003-08 | Φ6*126mm Positioning Rod | 1 |
9 | GG003-01 | Guide Pin Φ2x500 | 1 |
10 | GG003-12 | SW2.5T type Hex Screwdriver | 1 |
11 | GG003-06 | Φ3.5 Drill Bushing | 1 |
12 | GG003-07 | Ø8*Ø6 Drill Bushing | 2 |
13 | GG003-16 | T type Positioning Rod | 1 |
14 | GG003-14 | Proximal Positioning Rod Locking Weel M6-SW5 | 2 |
15 | GG003-17 | Guide Rod | 1 |
16 | GG003-21 | Proximal Target Device | 1 |
17 | GG003-20 | Distal Target Device | 1 |
18 | GG003-19 | Main Nail Handle | 1 |
19 | GG003-11 | Hollow M6 Hanging Rod Bolt | 1 |
20 | GG003-18 | Positioning card | 1 |
21 | GG003-09 | ø10*8*94mmSleeve | 1 |
22 | GG003-15 | 0-60mm Depth Gauge | 1 |
23 | JG001-24 | T type Reamer Quick Couping Handle(triangle) | 1 |
24 | JG001-04 | ø5.2 T type Positioning Rod Flat Head Drill | 1 |
25 | JG001-14 | L type Wrench(Hex)SW5 | 1 |
26 | JG001-11 | Cannula(ø5.2*8.0*150) | 1 |
27 | JG001-03 | Drill Bit ø5.2*300(triangle) | 1 |
28 | JG001-25 | Universal Handle(M6-M8*1) | 1 |
29 | JG001-15 | Open Wrench SW11 | 1 |
30 | Instrument Box | 1 |