 |
| Quantity: | |
|---|---|
485
| P/N | Diameter(mm) | Length(mm) | P/N | Diameter(mm) | Length(mm) | P/N | Diameter(mm) | Length(mm) |
| 48501L/R | φ9 | 340 | 48506L/R | φ10 | 340 | 48511L/R | φ11 | 340 |
| 48502L/R | 360 | 48507L/R | 360 | 48512L/R | 360 | |||
| 48503L/R | 380 | 48508L/R | 380 | 48513L/R | 380 | |||
| 48504L/R | 400 | 48509L/R | 400 | 48514L/R | 400 | |||
| 48505L/R | 420 | 48510L/R | 420 | 48515L/R | 420 | |||
| Material:Titanium Alloy、Stainless Steel | ||||||||
| Note:Used for intertrochanteric and distal femoral fracture | ||||||||
Lag Screw 486
| P/N | Material | Diameter(mm) | Length(mm) |
| 48601 | Titanium Alloy、Stainless Steel | φ6.4 | 70-115mm Every 5mm is a specification |
φ4.7 Full Thread Locking Screw 487
| P/N | Material | Diameter(mm) | Length(mm) |
| 48701 | Titanium Alloy、Stainless Steel | φ4.7 | 26-60mm Every 2mm is a specification 64-84mm Every 4mm is a specification |
End Cap 488
| P/N | Material | Length(mm) |
| 48801 | Titanium Alloy、Stainless Steel | 13 |
Advantages:
●Interlocking nails can be classfied into standard type and lengthened type.
●Connecting lag screw and locking screw provide effective stability and linear pressure.
●Pre-assemled set screw reduces the difficulty in operation.
●Elastic design of distal end of main nail to reduce potential distal femoral fracture.
| P/N | Diameter(mm) | Length(mm) | P/N | Diameter(mm) | Length(mm) | P/N | Diameter(mm) | Length(mm) |
| 48501L/R | φ9 | 340 | 48506L/R | φ10 | 340 | 48511L/R | φ11 | 340 |
| 48502L/R | 360 | 48507L/R | 360 | 48512L/R | 360 | |||
| 48503L/R | 380 | 48508L/R | 380 | 48513L/R | 380 | |||
| 48504L/R | 400 | 48509L/R | 400 | 48514L/R | 400 | |||
| 48505L/R | 420 | 48510L/R | 420 | 48515L/R | 420 | |||
| Material:Titanium Alloy、Stainless Steel | ||||||||
| Note:Used for intertrochanteric and distal femoral fracture | ||||||||
Lag Screw 486
| P/N | Material | Diameter(mm) | Length(mm) |
| 48601 | Titanium Alloy、Stainless Steel | φ6.4 | 70-115mm Every 5mm is a specification |
φ4.7 Full Thread Locking Screw 487
| P/N | Material | Diameter(mm) | Length(mm) |
| 48701 | Titanium Alloy、Stainless Steel | φ4.7 | 26-60mm Every 2mm is a specification 64-84mm Every 4mm is a specification |
End Cap 488
| P/N | Material | Length(mm) |
| 48801 | Titanium Alloy、Stainless Steel | 13 |
Advantages:
●Interlocking nails can be classfied into standard type and lengthened type.
●Connecting lag screw and locking screw provide effective stability and linear pressure.
●Pre-assemled set screw reduces the difficulty in operation.
●Elastic design of distal end of main nail to reduce potential distal femoral fracture.
